need help on ka-t
4 posters
Page 1 of 1
need help on ka-t
hi Guys im in a middle of my ka-t and was wondering were does the 4 plugs under the throttle plug up too? i remove my egr and used a block plate. so does these four plugs still play a role or not? if so were do they connect too? any help is greatly appreciate.
Cookie_Monster- Posts : 8
Join date : 2011-04-30
Re: need help on ka-t
im pretty sure it all gets plugged up. o u can remove it all if u take apart you intake.
pepe123- Posts : 111
Join date : 2011-02-01
Re: need help on ka-t
it's alot easier if you remove your manifold and take of the hard lines. all of them can be plugged up IF you removed your ENTIRE EGR assembly. but to be certain. Remove the manifold and follow the lines to where they go. on one end, blow through it and feel where air is coming out. If you have one that doesnt let air out then you know its going somewhere. If i remember right i just removed all of mine. Ask Stryfe (Ricky) too, to see what he says.
onevia drift- tuckin' rim
- Posts : 326
Join date : 2011-02-01
Age : 37
Location : Fresno
Re: need help on ka-t
You don't need anything on there except the IACV, PCV (route however you want), FPR line, and the heater hose lines.
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|