240SX Fresno
Would you like to react to this message? Create an account in a few clicks or log in to continue.

KA24DE wire tuck advice

3 posters

Go down

KA24DE wire tuck advice Empty KA24DE wire tuck advice

Post  pepe123 Thu Mar 10, 2011 1:51 pm

so im running my upper harness through my intake manifold and extending my injector wires,im going for just a mild tuck.im new to wire tucking so i was just wondering if any of u have any tips or experience,also i think this would help alot of ppl.
pepe123
pepe123

Posts : 111
Join date : 2011-02-01

Back to top Go down

KA24DE wire tuck advice Empty Re: KA24DE wire tuck advice

Post  onevia drift Fri Mar 11, 2011 6:10 pm

Wire tucks are nice and pretty and all but when you have any problem what-so-ever with wiring it is an absolutely a pain in the ass to diagnose where and/or what the problem is.

All i can say it that when you do the tuck be sure to do it right! Ive heard of ppl using crimp(butt) connectors for things suck as injectors and grounds to get them to go where they are wanted.

DONT DO THAT... Solder the connections legit. make sure the solder penetrated into and around the entire wire, shrink wrap them and tape em. The last thing you want is a pos. and a neg. touching or something grounding out.
onevia drift
onevia drift
tuckin' rim

Posts : 326
Join date : 2011-02-01
Age : 36
Location : Fresno

Back to top Go down

KA24DE wire tuck advice Empty Re: KA24DE wire tuck advice

Post  pepe123 Sat Mar 12, 2011 9:31 am

ya im making sure everything is solder correctly and loomed. im thinking im just guna extend the injector wires and dress up the other ones and that it. im just not sure what the best way to hide that big part of the harness that originally sits on top of the intake,in that plastic thig

im thinking of running it thru the intake,but under the intake might look alot better.
pepe123
pepe123

Posts : 111
Join date : 2011-02-01

Back to top Go down

KA24DE wire tuck advice Empty Re: KA24DE wire tuck advice

Post  StryfeS13 Sun Mar 13, 2011 4:08 pm

http://chasebaysonline.myshopify.com/products/cb-nissan-s13-ka24de-engine-harness

* Made with brand new wire and pins
* NO SOLDERS
* ENGINE HARNESS REPLACEMENT, does not include headlight, taillight, or fusebox portions.
* Loomed with Nylon Sleeving and Adhesive Heat shrink
* Eliminate the risk of your old, used, and worn out engine harness failing when you need it most! (IE: On the track, out in the boonies, rush hour traffic, a crime scene)
* Eliminate chassis wiring on your race car, Tuck your engine harness, simplify your wiring
* Harness routes straight to ECU like stock with OEM chassis plugs installed (...like OEM)
* LOWER/TRANS Harness is integrated, make this harness a one piece design.
* Optional Mil Spec connector for the firewall
* Completely redesigned/reinvented Nissan engine harness that fits perfectly and rocks a stealthy look
* Turn around time varies upon how busy we are, it could be anywhere from 1 to 5 weeks. Call us if you need expediting.
* Core engine harness and lower/trans harness required with purchase. If you do not have one we can provide you with one for additional $$
KA24DE wire tuck advice Cm1_n_ka24_8_grande
KA24DE wire tuck advice Cm1_n_ka24_10_grande
StryfeS13
StryfeS13
Moderator

Posts : 149
Join date : 2011-02-01
Age : 33
Location : Clovis

https://fresno240sx.forumotion.com

Back to top Go down

KA24DE wire tuck advice Empty Re: KA24DE wire tuck advice

Post  pepe123 Sun Mar 13, 2011 4:49 pm

ya i seen those, nice stuff it looks worth the price,but right now my pockets are slim.
but damn it looks clean.
pepe123
pepe123

Posts : 111
Join date : 2011-02-01

Back to top Go down

KA24DE wire tuck advice Empty Re: KA24DE wire tuck advice

Post  Sponsored content


Sponsored content


Back to top Go down

Back to top


 
Permissions in this forum:
You cannot reply to topics in this forum